东莞市壹唯工业自动化有限公司
DONGGUAN YATWAI INDUSTRIAL AUTOMATION CO., LTD

넳 넲

  • 日本工进                             台湾仟岱                      美国海利可

    日本三木                          日本椿本                         日本电产

    日本协和                          日本昕芙旎雅（原日本神钢）

全国服务热线：0769-2282 1655

东莞市壹唯工业自动化有限公司 官网  ꄲ  日本SINFONIA系列  ꄲ  张力控制装置  ꄲ  PS type controller(6.0A)  ꄲ  PS type controller(6.0A)
PS-6.0A
넳 넲

PS type controller(6.0A)

ꄴ上一个： 无
ꄲ下一个： 无

 

PS-6.0A Constant voltage/Constant current power source

This is a constant voltage/current power source dedicated to controlling the load torque of electromagnetic powder clutches/brakes. While operating in constant current mode, the input voltage will vary, allowing stable torque control even with temperature variation in the electromagnetic powder clutch/brake's coil. The constant voltage/constant current mode can be switched depending on the application and it provides over voltage/over current protection in case of load abnormalities.

 ps_6a_1

 

 

 

Features 

 

| Constant voltage/Constant current

     Constant voltage/Constant current is switchable, providing stable torque control.

 

| 3 methods of torque input

     You can set the torque using one of three methods: with the integrated dial, with an external dial or with an input voltage.

 

| Small and lightweight

     By using a switching regulator, we could achieve an impressively small size and weight.

 

| Over voltage/over current protection

     In the event of an over voltage/over current, the output is shut off and an indicator lamp notifies the operator.

 

| Output cutoff

     The torque generation or torque free status can be controlled using an external signal.

 

 

 

Dimensional outline drawing

 

ps_6_2

 

 

Specifications

Type PS-6.0A
Input power AC100V/110V or 200/220V ±10%
Terminal block is switched 50/60Hz		   Monitor display Output current 0.0-6.2A with constant current setting
Output voltage 00-24V with constant voltage setting
Over voltage 0V
Over current 0C
Output voltage 0.5-24V ±2.5% with constant voltage setting Operating temperature 0〜40°C (storage temperature -10-50°C)
Output current 0.1-6.2A±2.5%(at24V) with constant current setting Structure Steel plate, wall mounting, protective enclosure
Control input Input resistance 10kΩ (front panel, external volume) Paint color

· Case Munsell 5Y8/0.5

· Panel P2-1007
External voltage input 0-10V/FS Input resistance about 10kΩ Weight 2.5kg
External signal RUN signal(pulse signal) Output ON
STOP signal(pulse signal) Output OFF		 Compatible models All models of powder clutches/brakes

 

Input/Output connection diagram

 

ps_6_4

 

This unit controls tension with an integrated torque control clutch/brake to eliminate the looseness and elongation in the manufacturing process.