FMP small capacity contactless controller
|
Rating excitation The FMP is a contactless controller used for C&B motors and small capacity clutches/brakes. The contactless power transistor circuit used for clutch/break switching is very reliable and the discharge circuit uses a capacitor technique to improve the cut off characteristics, improving precision and high frequency control. |
|
Dimensional outline drawing
Specifications
| Type | TMP-40D | |
| Input voltage AC V | 100/110 - 200/220 | |
| Fuse capacity A | 1 | |
| Output voltage DC V | 24 | |
| Capacity W | 10 | |
| Rating | Continuous | |
| Adjustment(Volume variable) | Time lag(ms) | 0-45(20 at shipping) |
| Circuit direction | IC contactless circuit | |
| Structure | Steel plate, wall mounting, protective type | |
| Weight kg | 1.5 | |
| Painting color | Munsell 7.5BG6/1.5 | |
| Main applicable electromagnetic clutch/.brake | C&B pack,MP4-5,BO/BB2-5 | |
(Note) Don't connect varistor for discharge circuit
External connection diagram
(Note)
1 PS terminal is for switching CL/MB through the external power source. See the operation manual for details.
2 Only a current of several milliamps can be used as the external source, so please use an appropriate input.
Memo
1 The lifespan is nearly permanent due to the adoption of a contactless mechanism.
2 By simply changing pins (A,B,C), it can be used either for 2 signals or a single signal.(Factory settings indicate 2 signals).
3 It achieves stable operation even under high frequency use due to a wide time lag adjustment range. For both clutches/brakes, the time lag adjustment is done by RH60, and by turning it clockwise, you can increase the time lag(It is set to be 20ms at the factory).
